It is important to keep a chair mat to avoid dents and serious scratches on the hardwood flooring. But due to frictional effects chair mats tend to slide. How to keep chair mat from sliding on hardwood floors? The continuous movement of the chair or your strolling, in the same way, can cause your chair mat to shift, making the carpet height unreliable. You will get annoyed and moreover, it will be dangerous causing accidents. You will not be able to focus on work. So, it’s better to keep them from sliding.
Why Do Chair Mats Slide on Hardwood Floors?
Chair mats can easily move their position and shift if the friction between the chair mat and the hard floor is missing or law. Also, the uneven floor surface and the texture of the flooring should contribute in withstand the ability of the mat.
The flooring should be strong enough to support the mat and should lie even against the floor. It’s better to use a chair mat with smooth backing on the hardwood, but first, you must check the friction between them because smooth mat backing will cause low friction and support in sliding.
Chair mats are extremely dangerous when some curls or ridges lead the mats to be uneven on the floor. So, you could trip or fall, causing a great possibility of an accident. And if the mat slides away without your attention, it could damage the floor, causing scratches or gouges.
Apart from this, if the mat slides continuously while working, you will get annoyed and disturbed, losing concentration on your due work.
How to Keep Chair Mat from Sliding on Hardwood Floors?
Are you fed up with unpleasant sliding chair mats and wondering how to keep chair mats from sliding on hardwood floors? If so, you’ve come to the correct spot for simple solutions to this problem. You can use double-sided adhesives, rubber backers, grippers, rug pads, or Velcro to keep chair mat from sliding on hardwood floors. If done correctly, these solutions can indeed be incredibly simple and economical.
Attaching a double-sided tape to the chair mat is a simple and cheap alternative.
- Cut the tape to the desired length, preferably 5 inches.
- Attach the tapes to each corner of the mat.
- If you have a large chair mat, I propose attaching tape to the centre location of every side of the chair mat. That will provide additional security.
When removing, be sure the product selected is safe for hardwood flooring. That will guarantee it doesn’t leave any residue behind. This is simple to pull away without hurting the surface beneath.
- Simply purchase the rubber backing that will fit beneath your chair mat.
- Resize it if not fitting.
- Place it below the chair mat.
Can easily remove and no harm may cause either to the mat or to the floor.
Claw Backing or Gripper
I recommend using a claw backing or gripper if you’re looking for something more functional. The gripper will perform a fantastic job of keeping the chair mat in place.
- Just attach the grippers as you would a sticker or adhesive.
- Connect it to every corner of the chair mat
- Place the chair mat on the floor.
The rug pad will keep the chair mat in a position as well as keep it from sliding around.
- Set the rug pad on a clean, dry floor.
- Removes creases from the pad, allowing it to lie flat on the surface.
- Lay the chair mat on top of the pad.
- You can cut the sheet to the desired size using scissors.
You should remove the rug pad carefully if it’s made with a substance such as PVC as it may harm the flooring. A rug pad composed of natural rubber or a felt and rubber blend is good for a hardwood floor.
Velcro tape, also known as hook-and-loop tape, functions similarly to traditional hook-and-loop closures. Two strands of material are pushed together to form the tape. One strip is covered in tiny hooks, while the other is covered in thin loops. The two strands cling together to provide a strong closing system.
- Remove the VELCRO® logo release wrapper from the back of the loop tape.
- Place the adhesive side of the fabric on top.
- Put the fabric on the pressing surface, fastening the side down.
- Apply pressure and move the iron forth and back for 90 seconds.
When removing it from the chair mat use heat and slowly scrape away the parts you can. After, use some kind of solvent or alcohol to help remove the remaining.
Follow the below steps to remove it from the floor:
- Make sure the place is well-ventilated.
- Move a blow dryer or a steam cleaner on high heat slowly over a layer of adhesive tape.
- Scrap off the tape with a plastic scraper carefully.
Also, the following tips should consider;
The Right Chair Mat
You can purchase a chair pad with little parts underneath it that will act as a gripper on your hardwood flooring. Nonetheless, for optimal protection, I recommend utilizing carpets.
If you are looking for a chair mat for your hardwood floor, I recommend the Sharewin Chair Mat. It includes an anti-slip construction that provides a firm grip while not damaging your hardwood surface.
Frequency of Use
If you use the chair frequently, buy a mat that will last longer for the hardwood flooring. Also, consider using it frequently to prevent your leg fatigue and to ease movement.
Other Tips to Prevent Chair Mats from Sliding
Choosing the Right Size Mat
Tiny chair mats may allow the chair to slip away from the mat. Chair mats without lips, on the other hand, do not cover the region beneath the table. As a result, when you relocate the chair, it may fall off the chair pad, causing harm to the hardwood floor.
Cleaning the Floor and the Mat Regularly
If the hardwood floor is not cleaned properly and small hard particles or dirt become lodged between both the chair mat and the hardwood floor, your flooring may be damaged.
Worn of Chair Mat
When your chair mat becomes worn, the constant rubbing of the chair can damage it and cause holes in the chair mat. Though the holes are minor, they absorb dirt and allow the chair mat to damage your chair.
Look At This Video,
Video Credits – Peter Von Panda
You May Also Like